Retia LLC
Meow Mixer PCB - PCB Only
Regular price
$12.00 USD
Regular price
Sale price
$12.00 USD
Unit price
per
Tax included.
Couldn't load pickup availability
Create your own Meow Mixer with this custom PCB!
This cat-themed beginner soldering PCB allows you to solder together a cat badge with adjustable LED eyes. Color dependent on current stock
By adjusting the potentiometer knob for red, green, or blue, you can tune the cat's eyes to any color!
Great for beginners learning to solder.
Guide to soldering here: https://github.com/skickar/CyberCamp/blob/main/CyberCat%20Slides/Soldering%20the%20Meow%20Mixer.pdf
**DOES NOT INCLUDE PARTS TO COMPLETE PCB, KITS IN STOCK SOON**
**TO COMPLETE THIS PCB, YOU WILL NEED:**
3x 10k Trim Potentiometers, 3 pin - https://a.co/d/irNPmqb
6 x 100 Ohm Resistors - https://a.co/d/eQBRyMD
2x 10mm RGB LED (Common Cathode) https://a.co/d/dYUgHZe
1 Toggle Switch (1P2T) - https://a.co/d/aoBSvKU
A CR2032 Battery - https://a.co/d/alOQeU1
CR2032 battery holders (SMD) https://a.co/d/9ShF7MG
A soldering iron and wire cutters are also required.
**PLEASE BE CAREFUL AND USE EYE PROTECTION WHEN SOLDERING OR CUTTING EXCESS LEADS. THE LEFTOVER PINS ON THE BACK OF THE MEOW MIXER CAN BE SHARP!**
